Table of Contents
Fetching ...

Comprehensive Optical, Electrical and Humidity Sensing Properties of Bifidobacterium infantis 35624 Thin Films

S. Ozturk, H. Tatlipinar, K. Bozkurt, O. Ozdemir, B. C. Omur, A. Altindal, H. S. Bozkurt

TL;DR

BB35 thin films are established as a promising eco-friendly semiconducting material for humidity sensing applications and open new avenues for integrating biological materials into electronic and optoelectronic devices.

Abstract

In this study, we present a comprehensive investigation of the structural, optical, and electrical properties of Bifidobacterium longum subsp. longum 35624 (BB35) thin films, and demonstrate their application as a novel relative humidity sensor. UV-Visible spectroscopy revealed that BB35 exhibits two distinct optical absorption regions, corresponding to direct band gaps of 2.1 \pm 0.05 eV and 2.8 \pm 0.05 eV, as confirmed by Tauc plot analysis, establishing BB35 as a genuine wide-bandgap semiconductor material. Photoluminescence measurements under 280 nm excitation exhibited a broad emission spectrum, which was deconvoluted into four Gaussian peaks centered at 434 nm (2.86 eV), 499 nm (2.48 eV), 543 nm (2.3 eV), and 620 nm (2.0 eV), indicating the presence of multiple radiative recombination centers characteristic of semiconducting materials. Electrical characterization revealed dispersive charge transport with current decay following a power-law I \propto t^{-α} (α\approx 0.3), suggesting Poole-Frenkel conduction mechanism typically observed in disordered organic semiconductors. The relative humidity (RH) sensing performance of BB35 films was evaluated using gold interdigital electrodes across 15-90% RH range. The sensor exhibited reversible response with sensitivity increasing linearly from 0.85 to 4.80 as RH increased from 15% to 90%. The devices demonstrated excellent stability over two months with less than 5% degradation in baseline current. These results establish BB35 thin films as a promising eco-friendly semiconducting material for humidity sensing applications and open new avenues for integrating biological materials into electronic and optoelectronic devices.

Comprehensive Optical, Electrical and Humidity Sensing Properties of Bifidobacterium infantis 35624 Thin Films

TL;DR

BB35 thin films are established as a promising eco-friendly semiconducting material for humidity sensing applications and open new avenues for integrating biological materials into electronic and optoelectronic devices.

Abstract

In this study, we present a comprehensive investigation of the structural, optical, and electrical properties of Bifidobacterium longum subsp. longum 35624 (BB35) thin films, and demonstrate their application as a novel relative humidity sensor. UV-Visible spectroscopy revealed that BB35 exhibits two distinct optical absorption regions, corresponding to direct band gaps of 2.1 \pm 0.05 eV and 2.8 \pm 0.05 eV, as confirmed by Tauc plot analysis, establishing BB35 as a genuine wide-bandgap semiconductor material. Photoluminescence measurements under 280 nm excitation exhibited a broad emission spectrum, which was deconvoluted into four Gaussian peaks centered at 434 nm (2.86 eV), 499 nm (2.48 eV), 543 nm (2.3 eV), and 620 nm (2.0 eV), indicating the presence of multiple radiative recombination centers characteristic of semiconducting materials. Electrical characterization revealed dispersive charge transport with current decay following a power-law I \propto t^{-α} (α\approx 0.3), suggesting Poole-Frenkel conduction mechanism typically observed in disordered organic semiconductors. The relative humidity (RH) sensing performance of BB35 films was evaluated using gold interdigital electrodes across 15-90% RH range. The sensor exhibited reversible response with sensitivity increasing linearly from 0.85 to 4.80 as RH increased from 15% to 90%. The devices demonstrated excellent stability over two months with less than 5% degradation in baseline current. These results establish BB35 thin films as a promising eco-friendly semiconducting material for humidity sensing applications and open new avenues for integrating biological materials into electronic and optoelectronic devices.
Paper Structure (14 sections, 4 equations, 7 figures)

This paper contains 14 sections, 4 equations, 7 figures.

Figures (7)

  • Figure 1: (a) Absorption versus wavelength (b) square of (absorption x energy) versus energy plot for BB35.
  • Figure 2: Room temperature photoluminescence spectra of BB35 as a function of excited light power.
  • Figure 3: Deconvoluted PL spectrum of BB35 at upmost excited power of LED light source.
  • Figure 4: Current decay of BB35 bifidobacterium under (a) +1 V, (b) -1 V bias voltages.
  • Figure 5: Capacitance variation of BB35 as a function of (a) bias voltage at constant f ($<1kHz$) (b) frequency at constant bias voltages
  • ...and 2 more figures