Logo
ScienceStack
Table of Contents
Fetching ...
Sign In

Gait Event Detection and Travel Distance Using Waist-Worn Accelerometers across a Range of Speeds: Automated Approach

Albara Ah Ramli, Xin Liu, Kelly Berndt, Chen-Nee Chuah, Erica Goude, Lynea B. Kaethler, Amanda Lopez, Alina Nicorici, Corey Owens, David Rodriguez, Jane Wang, Daniel Aranki, Craig M. McDonald, Erik K. Henricson

TL;DR

This work tackles the challenge of extracting accurate temporospatial gait features from a single waist-worn accelerometer in children with DMD during community activities. It introduces a calibration-based pipeline that combines clinical observation, ML-driven step detection on the AP accelerometer signal, and individualized regression to map per-step peak accelerations to step length, enabling distance estimation across a wide speed range. The Walk4Me system demonstrated high agreement with ground-truth across both DMD and TD groups, with average step-count, distance, and step-length errors of approximately $3.46\%$, $5.83\%$, and $5.80\%$ respectively, and Pearson's $r$ values near $0.99$ when compared to ground-truth data. This approach, which requires only a waist-worn device and short calibration at several speeds, offers a practical, GRF-free method for community-based gait assessment applicable to motor-impaired populations.

Abstract

Estimation of temporospatial clinical features of gait (CFs), such as step count and length, step duration, step frequency, gait speed, and distance traveled, is an important component of community-based mobility evaluation using wearable accelerometers. However, accurate unsupervised computerized measurement of CFs of individuals with Duchenne muscular dystrophy (DMD) who have progressive loss of ambulatory mobility is difficult due to differences in patterns and magnitudes of acceleration across their range of attainable gait velocities. This paper proposes a novel calibration method. It aims to detect steps, estimate stride lengths, and determine travel distance. The approach involves a combination of clinical observation, machine-learning-based step detection, and regression-based stride length prediction. The method demonstrates high accuracy in children with DMD and typically developing controls (TDs) regardless of the participant's level of ability. Fifteen children with DMD and fifteen TDs underwent supervised clinical testing across a range of gait speeds using 10 m or 25 m run/walk (10 MRW, 25 MRW), 100 m run/walk (100 MRW), 6-min walk (6 MWT), and free-walk (FW) evaluations while wearing a mobile-phone-based accelerometer at the waist near the body's center of mass. Following calibration by a trained clinical evaluator, CFs were extracted from the accelerometer data using a multi-step machine-learning-based process and the results were compared to ground-truth observation data. Model predictions vs. observed values for step counts, distance traveled, and step length showed a strong correlation. Our study findings indicate that a single waist-worn accelerometer calibrated to an individual's stride characteristics using our methods accurately measures CFs and estimates travel distances across a common range of gait speeds in both DMD and TD peers.

Gait Event Detection and Travel Distance Using Waist-Worn Accelerometers across a Range of Speeds: Automated Approach

TL;DR

This work tackles the challenge of extracting accurate temporospatial gait features from a single waist-worn accelerometer in children with DMD during community activities. It introduces a calibration-based pipeline that combines clinical observation, ML-driven step detection on the AP accelerometer signal, and individualized regression to map per-step peak accelerations to step length, enabling distance estimation across a wide speed range. The Walk4Me system demonstrated high agreement with ground-truth across both DMD and TD groups, with average step-count, distance, and step-length errors of approximately , , and respectively, and Pearson's values near when compared to ground-truth data. This approach, which requires only a waist-worn device and short calibration at several speeds, offers a practical, GRF-free method for community-based gait assessment applicable to motor-impaired populations.

Abstract

Estimation of temporospatial clinical features of gait (CFs), such as step count and length, step duration, step frequency, gait speed, and distance traveled, is an important component of community-based mobility evaluation using wearable accelerometers. However, accurate unsupervised computerized measurement of CFs of individuals with Duchenne muscular dystrophy (DMD) who have progressive loss of ambulatory mobility is difficult due to differences in patterns and magnitudes of acceleration across their range of attainable gait velocities. This paper proposes a novel calibration method. It aims to detect steps, estimate stride lengths, and determine travel distance. The approach involves a combination of clinical observation, machine-learning-based step detection, and regression-based stride length prediction. The method demonstrates high accuracy in children with DMD and typically developing controls (TDs) regardless of the participant's level of ability. Fifteen children with DMD and fifteen TDs underwent supervised clinical testing across a range of gait speeds using 10 m or 25 m run/walk (10 MRW, 25 MRW), 100 m run/walk (100 MRW), 6-min walk (6 MWT), and free-walk (FW) evaluations while wearing a mobile-phone-based accelerometer at the waist near the body's center of mass. Following calibration by a trained clinical evaluator, CFs were extracted from the accelerometer data using a multi-step machine-learning-based process and the results were compared to ground-truth observation data. Model predictions vs. observed values for step counts, distance traveled, and step length showed a strong correlation. Our study findings indicate that a single waist-worn accelerometer calibrated to an individual's stride characteristics using our methods accurately measures CFs and estimates travel distances across a common range of gait speeds in both DMD and TD peers.
Paper Structure (15 sections, 1 equation, 6 figures, 3 tables)

This paper contains 15 sections, 1 equation, 6 figures, 3 tables.

Table of Contents

  1. Introduction
  2. Materials and Methods
  3. Participants
  4. Equipment
  5. Gait and Events Detection and Data Analysis
  6. Method of Step Detection
  7. Method of IC Detection
  8. Method of Step Length Estimation Using Regression
  9. Estimating the Distance
  10. Calculating the Average Step Length
  11. Error Percentage Rates
  12. Gait Pattern Representation
  13. Results
  14. Discussion
  15. Conclusions

Figures (6)

  • Figure S1: (A) The relationship between step length and acceleration of the body's center of mass at various speeds for TD individuals and those with DMD. The plotted curves depict the regression model, with the black line representing all participants, the green line representing TD participants, and the red line representing DMD participants. (B) The diagram depicts the data flow of our model training and prediction process. In the training phase, the model uses five speed calibrations, SC-L1 to SC-L5, with ground truth to predict the average step length. The input to our model is the acceleration signal from unseen gait activities (6 MWT, 100 MRW, and FW).
  • Figure S2: (A) Diagram depicting the corridor layout with two cones positioned 25 m apart, guiding walking, running, and jogging directions. Exception for free-walk (FW), allowing participants the freedom to move within the building. (B) Image showcasing the real-life corridor environment.
  • Figure S3: This figure presents the signal processing of the raw accelerometer signal of the anteroposterior movement (z$-$axis) of participant ID 2 on fast-walk speed calibration (SC-L4) for 2.4 s. (A) Original raw accelerometer signal. (B) Filtered signal. (C) Peak detection of the filtered signal. (D) Locate the beginning and the end of each step. (E) Peaks detection of the original signal. (F) Locate the highest peak in the original signal.
  • Figure S4: Cont.
  • Figure S5: Comparison between the estimates and ground-truth values for both pedometers and our Walk4Me system to illustrate the accuracy across four key metrics: (A) the number of steps. The adjusted R-squared of our Walk4Me is 0.9973, while the pedometer is 0.6826. (B) The distance in meters. The adjusted R-squared of our Walk4Me is 0.9937, while the pedometer is 0.6987. (C) The average step length in meters. The adjusted R-squared of our Walk4Me is 0.9595, while the pedometer is 0.0094. (D) the average speed in meters per second.
  • ...and 1 more figures